Recent Projects and Photos by K&E A/C and Refrigeration, Inc

A 22 year old Trane system was removed and replaced with a 3 ton Goodman system. A permit was pulled at homeowner's request as the house was going to be put on the market. Inspector passed job with flying colors. Service: AC Replace & Installation Location: Winter Park, […]

An old compressor for a Trane condenser was removed and a new 7.5 ton was installed. I removed the oil from the new compressor as I was changing the gas over from R22 to 407C and the oil was not correct. This compressor was a massive […]

A leaking Lennox AHU was removed and replaced with a high quality Carrier multi setting AHU. Condenser was not that old so I recommended they use the old one with the Carrier AHU. I always recommend to my customers what I would do in their situation. […]

A very old unit was removed and replaced with a upgraded 410 Goodman 3 ton air handler and condenser. The heater burned up and caught fire inside the AHU. The unit was very old, upgrade was needed. Location: Kissimmee, Florida Budget: $5600.00 […]

This was a Carrier install in Apopka, a rheem system was removed and a Carrier air handler and condenser was installed in its place. Lines were flushed, new system brazed in. All electrical and modifications were done to accommodate the upgrade. Budget: $7900 […]

Installed a Reme Halo in home in Apopka. Reme is a dual system to clean and purify the air. Air is brought through a UV light system which kills any microbes or pathogens. The system also creates O3 ozone. Which bonds to allergens and particles in […]

Old diffusers were cut out and removed from a grid ceiling, new ones were attached to the supply lines. Also the grid was insulated with R-19 to keep the area cooler. Budget: $2200 […]

New Carrier/Bryant 16 seer with duct work and electrical was added in to supplement church hall. Condenser and AHU was installed with new copper ran and new duct work with return and supply grills. Budget: $16,000 […]

Recovered R22 gas, removed old compressor and installed new Copeland Compressor, hooked up all controls and electrical. Brazed in place, nitrogen purged and vacuumed. Added in new R 22 gas and started. Charged to specification. Budget: $4,000 […]

Pumped down condenser cut out and Removed defective condenser and brazed installed new Goodman 3 ton in its place. Released charge and adjusted to specification. Budget: $2800 […]